casappa齿轮泵PLP30系列
casappa齿轮泵PLP30.51D0-83E3-LED/EB-N-FS
CASAPPA提供:
Fixed and variable displacement hydraulic pumps and motors
齿轮泵、定量、变量液压泵及液压马达
Hydraulic valves to control pressure and flow rate
压力和流量控制器
Hydraulic filters
液压滤清器
齿轮泵：
PLM系列：
PLM系列：
PHP系列：
KP系列：
PLP系列：
齿轮泵和电机内置三件铸铁阀体。
新的齿轮泵和电机“PH”系列是“POLARIS”系列的演变。
“POLARIS PH”具有由铸铁制成的新主体，具有更高的运行参数，并保持了对轴，法兰，端口和内置阀门的全面POLARIS通用性。
该项目的目标是铲车，滑移装载机以及传统铝泵被迫接近极限的所有应用。除了增加强度之外，与铸铁盖配合身体的可能性进一步降低了噪音水平。
从0.50in / rev（8,26cm / rev）到2.01in / rev（33,03cm / rev）的位移。
大。峰值压力高达4350 psi（300 bar）。
大。速度可达3500分钟
高工作压力也适用于高位移
使用寿命长
低噪音水平
在高温下也具有高体积效率
进出口优化 - 高速
组合在多个泵
内置阀门简化了电路设计
内置阀门
防气蚀阀
大减压阀
优先阀
“负载感应”优先阀
旁通电动阀
比例安全阀
反向阀
Casappa柱塞泵LVP系列
特征
可变排量轴向柱塞泵斜盘设计。
PLATA泵非常适用于中高压开路应用。
从1.75in / rev(28,7cm / rev)到5.36in / rev(87,9cm / rev)大。峰值压力高达5075 psi(350 bar)
大 速度可达3000分钟-1
节能
低噪音发射
响应时间短
驱动轴轴承适用于径向和轴向负载
多重组合
控制
压力补偿器
流量和压力补偿器(负载感应)
扭矩限制器
电液伺服控制
选型资料如下：
POLARIS 10 gear pumps and motors meet a wide range of and industrial applications. SAE and EUROPEAN mounting flanges and rear covers are available in both cast iron and aluminum for reduced weight. The extruded aluminum body houses single piece gear, journal, shaft assemblies with a pressure balancing system that provides the highest volumetric and overall efficiencies available. Exceptionally large bearings make possible longer life at high pressure. A complete range of drive shafts in spline, parallel keyed, and tapered versions to meet all SAE, and EUROPEAN standards.
|
|
|
|
|
|
| Max. | Max. (2) | Pump | Motor |
|
|
| |
|
| POLARIS | POLARIS | Theoretical | Min. (1) | flow (3) | Approx. (5) |
| ||||||
|
| (1) | continuous | torque (4) |
| |||||||||
|
| displacement | speed | @ 1800 rpm | weight |
| ||||||||
|
| pump | motor | speed | pressure p1 | @ 100 psi |
| |||||||
|
|
|
|
| @ p1 |
|
|
| ||||||
|
| size | size |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| in3 /rev | cm3 /rev | rpm | rpm | psi | bar | US gpm | lbf in | kg | lb |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PLP 10-1 | PLM 10-1 | 0.06 | 1 | 650 | 4000 | 3770 | 260 | 0.46 | 0.84 | 1.40 | 3.09 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PLP 10-1,5 (6) | PLM 10-1,5 (6) | 0.09 | 1.5 | 650 | 4000 | 3770 | 260 | 0.69 | 1.26 | 1.45 | 3.20 |
|
| 10 | PLP 10-2 | PLM 10-2 | 0.12 | 2 | 650 | 4000 | 3770 | 260 | 0.92 | 1.68 | 1.50 | 3.31 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| PLP 10-2,5 (6) | PLM 10-2,5 (6) | 0.15 | 2.5 | 650 | 4000 | 3770 | 260 | 1.15 | 2.10 | 1.52 | 3.35 |
| |
| POLARIS |
| ||||||||||||
01.1998 | PLP 10-3,15 | PLM 10-3,15 | 0.19 | 3.1 | 650 | 4000 | 3770 | 260 | 1.42 | 2.60 | 1.54 | 3.40 |
| |
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PLP 10-4 | PLM 10-4 | 0.24 | 4 | 650 | 4000 | 3625 | 250 | 1.84 | 3.35 | 1.58 | 3.48 |
|
|
| PLP 10-5 | PLM 10-5 | 0.30 | 4.9 | 650 | 4000 | 3625 | 250 | 2.25 | 4.10 | 1.65 | 3.64 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PLP 10-5,8 (7) | PLM 10-5,8 (7) | 0.35 | 5.8 | 650 | 3500 | 3300 | 230 | 2.67 | 4.86 | 1.70 | 3.75 |
|
Edition: |
| PLP 10-6,3 | PLM 10-6,3 | 0.38 | 6.2 | 650 | 3500 | 3300 | 230 | 2.85 | 5.20 | 1.73 | 3.81 |
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PLP 10-8 | PLM 10-8 | 0.48 | 7.9 | 650 | 3500 | 2610 | 180 | 3.69 | 6.62 | 1.80 | 3.97 |
|
|
| PLP 10-10 | PLM 10-10 | 0.60 | 9.9 | 650 | 3500 | 2030 | 140 | 4.64 | 8.30 | 1.90 | 4.19 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Minimum speeds can be reduced, maximum speeds can be increased. For specific operating conditions consult tech-nical dept. for recommendations and approval.
- Significantly higher intermittent pressures are allowed. Consult catalog or contact technical dept.
- Flow shown is minimum allowed for production pump at rated pressure with 10 wt oil at 110° Fahrenheit and can be used to cal-culate minimum volumetric efficiency under these conditions.
- Indicated torque is obtained by considering the average mechanical efficiency.
- Weight shown is for pump and motor with cast iron end-covers. There is a weight reduction for aluminum covers.
- Available only for single units with shaft code 81.
- Available only for single units with shafts code 81 and 86.
casappa齿轮泵PLP30.51D0-83E3-LED/EB-N-FS
